The touch screen of the newly replaced mobile phone film is not sensitive

time：2024-09-24 15:03:14 Tech Trends

After changing the mobile phone screen and applying the film, the touch screen does not work

The touch screen does not work after changing the mobile phone screen and applying the film, which may be due to the following reasons:

1. Mobile phone film quality problem: The film may cause the touch to be insensitive. You can try to peel off the film and try again to see if the touch is sensitive.

2. There is a problem with the recognition of the mobile phone screen such as cracks, resulting in an error in the transmission of the touch screen signal.

3. The surface of the mobile phone screen is not cleaned in front of the film, resulting in impurity bubbles, which affects the touch screen induction.

4. Finger skin is not clean, there are oil impurities or water, which will cause the touch screen to be insensitive.

5. There is a gap between the film and the LCD screen of the mobile phone due to hair or fine substances, which will cause insensitivity or failure.

Here's how to solve it:

1. Replace the phone film with a better quality.

2. Adjust the sensitivity of the phone's screen, for example, Samsung phones can solve the problem of insensitivity after film by enhancing the screen sensitivity in the settings.

3. Clean the surface of the phone screen and film to make sure there are no impurity bubbles.

4. Keep your fingers clean and avoid oil, impurities or water.

5. Replace the mobile phone screen, if there is a problem with the identification such as cracks in the screen, resulting in the wrong transmission of the touch screen signal, you may need to replace the mobile phone screen.

# Tech Trends #

《The touch screen of the newly replaced mobile phone film is not sensitive》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking