Transmission failures are displayed during ping, and common faults are displayed

time：2024-10-14 08:02:15 Gadget Insights

Ping transmission errors are common

Common failures that fail to ping a transmission include:

1. Destination Host Unreachable: This is caused by a network issue or a failure of the destination host, indicating that the ping request could not reach the destination host.

2. Firewall to block ping requests: In some network environments, administrators may configure firewalls to block ping requests to protect the network.

3. The target host does not have ping enabled: Some hosts may not have ping enabled, so they cannot respond to ping requests.

4. Incorrect router configuration: If the router is misconfigured, ping requests may fail to reach the destination host.

5. Network congestion: When the network is congested, ping requests may be lost because the network is unable to process the requests in a timely manner.

6. The current device's network is faulty: For example, the current IPv6 itself does not have Internet access, but an IPv6 address is pinged.

7. Teredo service is not enabled: When ping an IPv6 address, a service named Teredo is not enabled.

The specific reasons need to be analyzed on a case-by-case basis. You can check the lines in turn to ensure that the network cables, routers, network cards and other hardware are normal, and the interfaces are reliably plugged and unplugged without looseness. If you can't tell if DNSping is unreachable or if the network is unstable, use a first aid kit to find the problem.

# Gadget Insights #

《Transmission failures are displayed during ping, and common faults are displayed》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking