A message indicating that the memory is insufficient during scanning

time：2025-02-02 16:02:41 Smart Hardware

The scanner says that the PC does not have enough memory

The scanner prompts that the PC is low on memory may be due to the following reasons:

1. The storage capacity of the C drive in the computer is less than the file capacity you scanned, you need to clean up the C drive space to ensure that there is enough storage space.

2. The scanner itself is broken, such as the circuit board, CCD, etc., and needs to be sent to the manufacturer for repair.

3. The power cable and data cable of the scanner are not properly connected and need to be reconnected.

4. The scanner driver needs to be reinstalled due to the installation problem.

5. The scanner has a conflict with the hardware of the computer, and the hardware settings need to be checked.

6. One or more rogue software is installed on the system, and these software need to be uninstalled.

7. If there is a conflict between the programs loaded by the system or the programs that are running on the system, you need to check the running programs.

8. Add virtual memory, the method is as follows: right-click My Computer, --- Properties, --- Advanced ---- Performance, there is a virtual memory setting--- Advanced --- virtual memory, change --- if you have 256 memory, set it to 512-640 or larger, such as 640--960.

9. To modify the IP, you can manually change it on the control panel.

Depending on the situation, you can try the above solutions. If the problem persists, it is advisable to seek help from a professional.

# Smart Hardware #

《A message indicating that the memory is insufficient during scanning》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking