The UHR150 switch cannot be screwed

time：2024-11-22 09:02:24 Smart Hardware

The UHR150 switch cannot be screwed

There may be several reasons why the UHR150 switch cannot be screwed:

1. Insufficient battery: This may be due to poor contact caused by insufficient battery power or dirty binding posts of the starter, resulting in the phenomenon that the starter does not rotate.

2. Open circuit of the starting solenoid switch coil: After the circuit problem occurs, the car starter may not rotate.

3. Problems with the internal parts of the starter: It may be that the rectifier is dirty, the spring is too soft to touch, and a series of reasons can cause the car starter not to rotate.

4. Failure of the starting anti-theft system.

5. The spark plug gap is too large and the carbon deposits are too much.

6. The high-pressure cap connecting the spark plug is faulty.

7. The starter fuse is damaged.

It is recommended to go to the after-sales or repair place of the motorcycle for inspection and repair.

# Smart Hardware #

《The UHR150 switch cannot be screwed》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking