Electronic display parameter setting

time：2024-10-18 16:02:34 Smart Hardware

How to set the parameters of the electronic display screen?

1. The system setting of the LED display we only have to download a ledshowtw2012 graphic editing software, we have two ways to link this software, the first is to connect to the computer from the LED display with a wire (the first one is a little less). The second is to set an IP address for the controller of the LED screen through the network connection, so that all our LAN computers can be managed.

2. We now open the software, and we can see that there is a menu in the top row to set the software.

3. We use the second method to connect through the network, when our computer and LED screen are set in the LAN, click on the settings to start the screen parameter setting.

4. In the password dialog box, we can enter the default 888, and we can set the screen parameters after the password is entered, and the LED screen must be in the power on state at this time. The software recognizes several fast LED screens through the network, and displays several pieces on the computer.

# Smart Hardware #

《Electronic display parameter setting》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking