Mondeo light bulb changing tutorial method

 Content 1:

1. First of all, the tire specifications are recommended to be consistent with the tire specifications of the original car assembly, if you need to change the tire specifications, you must go to a professional modification shop for tire upgrades, or consult the car manufacturer.

2. In addition to accelerating the wear and tear of tires, it is impossible to pass the annual review, so try not to modify the tires.

3. It can be replaced, the original factory is 225/5 Read more>>

 Content 2:

1. Unplug the power socket of the bulb, and when pulling out the power socket of the bulb, the strength should be moderate to avoid loosening the socket wiring or damaging the bulb plug;

2. After unplugging the power interface, remove the waterproof cover behind the bulb, the material of the waterproof cover of the lamp is mostly soft rubber, and there is no difference between the waterproof cover of soft plastic material and some models, just a little force, you can see the waterproof cover broken;

3. Take out the bulb from the reflector, when taking out the bulb, you need to pinch the wire circlip on both sides with your fingers, and then pull out the bulb after the bulb is released;

 Content 3:

1. Prepare a flathead screwdriver, and then clip it in from the side of the license plate light, and then pry a little hard to remove it.

2. If you are changing the bulb, press and hold the handle of the plug, and then remove the lamp holder, the bulb is generally connected to the lamp holder, and you can take out the bulb by pulling it out directly.

 Content 4:

Step 1: Open the hood to find the headlight bracket, the car headlights are fixed with brackets, so that the headlights will not shake during the driving process. The first thing we need to operate is to open the hood of the car, and follow the engine compartment close to the position of the headlights, and it is easy to see the bulb base in the headlight assembly, which has many power cord connections, which is the headlight bracket we are looking for;

2. Step 2: Unplug the power cord, under normal circumstances, the connection between the bottom of the headlight and the power supply needs plastic buckles, metal clips, and nuts to fix. When we unplug the power plug, we need to press the small hidden buckle above the buckle to unplug the power supply smoothly. Of course, different models are fixed in different ways, such as screws and metal clips can be unscrewed with tools...